Holden VE & VF LS3 Performance Packages — Dyno Tuned in Gippsland
At Independent Motorsports, we specialize in Gen3 LSX tuning, particularly for Holden Commodore VE and VF models, using cutting-edge HP Tuners software to deliver peak performance and fuel efficiency. Our expert team goes beyond generic flash tunes by offering tailored tuning solutions that ensure your Holden operates safely and efficiently, with power you can feel. Utilizing our state-of-the-art in-house 4WD Dyno Dynamics Dyno, we perform real-time tuning to maximize your vehicle’s potential. Don’t settle for less—entrust your Holden Commodore VE or VF to the experts who care. Contact us today with any questions; we’re here to provide the best advice and service for your performance needs.
*Please note that power figures are estimates and may vary depending on camshaft choices.
Package Includes:
• ECU Maf Re-program
• VCM Performance MAF OTR Cold Air Intake
• VCM Performance infill panels
• K&N High Flow air filter
• All Labour to Fit & Test
LS3:
350kw (engine)
260kw (wheels)
$1995 incl. GST
Package Includes:
• ECU Re-program
• VCM Performance MAF OTR Cold Air Intake
• VCM Performance infill panels
• K&N High Flow air filter
• IMS 3” catback exhaust system Stainless Steel
• All Labour to Fit & Test
LS3
365kw (engine)
270kw (wheels)
$3895 incl. GST (with out bimodal)
Package Includes:
• ECU Re-program
• VCM Performance/Harrop MAF OTR Cold Air Intake
• VCM Performance/Harrop infill panels
• K&N High Flow air filter
• IMS 3” catback exhaust system Stainless Steel
• Stainless Steel 4 into 1 1 3/4 headers With 3" Cats
• All Labour to Fit & Test
LS3:
375kw (engine)
305kw (wheels)
Upgrade to a DPE Exhaust System $1495
$6695 incl. GST (without bimodal)
Package Includes:
- ECU Re-program
- VCM Performance MAF OTR Cold Air Intake
- VCM Performance infill panels
- K&N High Flow air filter
- IMS 3” catback exhaust system Stainless Steel
- Stainless Steel 4 into 1 1 3/4 headers With 3" Cats
- Penrite Motor Oil
- Genuine GM Oil Filter
- Penrite Coolant
- Timing Cover Set
- Valve Cover Seals
- Exhaust Manifold Gasket
- Cam gear 4 sensor
- Cam Bolts
- Cam Retainer Plate
- GM balancer bolt
- Performance Camshaft
- Valve spring upgrade
- Brisk Spark Plugs
- All Labour to Fit & Test
LS3:
425kw (engine)
340kw (wheels)
$9395 inc. GST (without bimodal)
- R-Series Dual Valve Spring & Pushrod Upgrade Add $495
- BTR trunnion Upgrade $495
- Upgrade to a DPE Exhaust System $1495
Please note: Prices in the video below are our old prices.
Package Includes:
- ECU Re-program
- VCM Performance MAF OTR Cold Air Intake
- VCM Performance infill panels
- K&N High Flow air filter
- IMS 3” catback exhaust system Stainless Steel
- Stainless Steel 4 into 1 1 3/4 headers With 3" Cats
- Penrite Motor Oil
- Genuine GM Oil Filter
- Penrite Coolant
- Timing Cover Set
- Valve Cover Seals
- Exhaust Manifold Gasket
- Cam gear 4 sensor
- Cam Bolts
- Cam Retainer Plate
- GM balancer bolt
- Performance Camshaft
- CNC Heads
- R Series Dual Valve Springs
- R Series Push rods
- Brisk Spark Plugs
- Head gaskets
- Head bolts
- Lifters
- Lifter Buckets
- All Labour to Fit & Test
LS3:
455kw (engine)
370kw - (wheels)
$12,595 incl. GST (without bimodal)
- BTR trunnion Upgrade $495
- Head Stud Upgrade $179.95
- Upgrade to a DPE Exhaust System $1495
VE-VF Harrop 2300 Or 2650 FDFI Supercharger Package Stage 6 500+KW
• Harrop 2300FDFI Supercharger
• Harrop Over the Radiator Intake
• Harrop Infill Panels
• 8 High Flow Performance Matched Fuel Injectors
• Direct Replacement 2.5Bar MAP Sensor
• Class Leading Low Temperature Radiator (Intercooler)
• Genuine Holden Coolant
• Forced Induction Specific Brisk Spark Plugs
• All necessary fittings, lines, belts ETC
• ECU Reprogram
• All Labour to Fit & Test
- $18,995 inc. GST drive in drive out 2300 FDFI
- $19,995 inc. GST drive in drive out 2650 FDFI
Package Includes:
- ECU Re-program
- Penrite Motor Oil
- Genuine GM Oil Filter
- Penrite Coolant
- Timing Cover Set
- Valve Cover Seals
- Cam gear 4 sensor
- Cam Bolts
- Cam Retainer Plate
- GM balancer bolt
- Performance Camshaft
- Brisk Spark Plugs
- All Labour to Fit & Test
LS3:
420kw (engine)
340kw (wheels)
$3995 incl. GST
- R-Series Dual Valve Spring & Pushrod Upgrade Add $495
- BTR trunnion Upgrade $495
Package Includes:
- ECU Re-program Mafless Tune
- Performance Camshaft
- GM Balancer Bolt
- Cam Bolts
- Cam Retainer Plate
- Penrite Motor Oil
- Genuine GM Oil Filter
- Penrite Coolant
- Crank Seal
- 3 Bolt Cam Gear
- Water Pump Gaskets
- Front Timing cover Gasket
- Valve Cover Seals
- Exhaust Manifold Gasket
- Brisk Spark Plugs
- CNC Heads
- Lifters
- R Series Dual Valve Springs
- R Series Push rods
- Lifter Buckets
- GM Head Gaskets
- GM Head Bolts
- All Labour to Fit & Test
LS3:
443kw (engine)
360kw (wheels)
$7295 inc. GST
- BTR trunnion Upgrade $495
- Head Stud Upgrade $179.95
Note: This package requires exhaust and intake upgrade from Stage 3
